Do pros use rapid trigger in deadlock? (Tested & Explained)

Yes — most high-level Deadlock players who own a Hall Effect keyboard use rapid trigger, mainly on their movement keys. It makes strafing, counter-strafing, and quick direction changes feel faster because a key resets as soon as you start lifting your finger, not after it travels all the way back up. It will not fix your aim, positioning, or game sense, but for a fast, movement-heavy hero shooter, it removes a small delay you hit hundreds of times per match.
Quick answer: the verdict in 2-3 lines
If you already have a rapid trigger keyboard, turn it on for WASD movement in Deadlock. Start with conservative settings, keep every SOCD or Snap Tap style feature off, and use no macros. That combination gives you the movement benefit pros want, without the risky extras.
If you do not own a Hall Effect keyboard yet, do not panic-buy one for this alone. It is a real but small edge, and consistency beats chasing the lowest number.
The evidence: what tests and pro play actually show
Deadlock is not a slow, hold-one-angle game. You constantly change direction: strafing in lane, dodging around cover, sliding, and repositioning in team fights. In that style, the delay that matters is not just how fast a key presses down — it is how fast it lets go.
On a normal mechanical keyboard, a key has a fixed reset point. You press down past the actuation point to move, and the key has to travel back up past that same fixed point before it stops and can press again. Rapid trigger changes that. The key resets after a short upward movement, so you can stop and restart movement sooner.
That is why the benefit shows up in repeated direction changes. A single press feels almost identical. The tenth, fiftieth, and hundredth strafe is where the faster reset adds up. Players call movement “tighter” or “more responsive” — less wasted travel on every release.
For the wider hardware debate, read are magnetic hall effect switches better than traditional mechanical. Rapid trigger is only possible because Hall Effect switches measure how far a key is pressed, instead of simply being on or off.
What it does not do matters too. It does not make your hero move faster, and it does not improve tracking or flicks directly. It only shortens the gap between you deciding to change direction and the game seeing it, on the release side.
High-level players in other fast shooters make the same choice. The pattern is similar in do pros use rapid trigger in fortnite and do pros use rapid trigger in marvel rivals: movement keys first, everything else optional, settings sensible rather than extreme.
Why it works this way: the mechanism, simply explained
Think of a normal switch like a light switch: on and off at the same fixed point, which you must return to fully before the next press counts.
A Hall Effect switch works more like a dimmer. A magnet moves with the key, a sensor measures its position, and the keyboard software decides where “pressed” and “released” happen. Because the position is measured continuously, the software can do two things a normal switch cannot:
- Adjustable actuation: You choose how far down a press has to travel before it registers.
- Rapid trigger: You choose how far up a key has to travel before it resets and can register again.
That second part is the whole trick. Instead of waiting for the key to return to a fixed point near the top, it resets after a short lift. Lift a little, it stops. Press again, it starts. In a strafe fight, that lets your left and right movement keys hand over to each other more cleanly, with less overlap and less dead time.
This also explains the downside. Set actuation and reset extremely low and the sensor registers tiny movements — exactly what you told it to do. Resting-finger pressure or natural key wobble can trigger an accidental press or cancel one you meant to hold. The settings are simply too sensitive for a hand to hold perfectly still.
When it matters — and when it honestly does not
Rapid trigger matters most in Deadlock when:
- You strafe a lot in gunfights. Quick left-right movement to become harder to hit is where faster resets help most.
- You change direction to dodge abilities. A faster stop and restart feels sharper around cover.
- You reposition constantly. The more often you tap movement keys, the more you use the feature.
- Your keyboard feels sluggish on release. If stopping feels late compared with starting, rapid trigger targets exactly that.
It honestly does not matter much when:
- Your basics are still developing. Positioning, aim, and knowing when to fight win far more games than a faster key reset.
- You mostly hold keys down. Long, sustained movement in one direction rarely uses the reset at all.
- Your settings cause mistakes. Accidental inputs cost more than the small gain gives back.
- You switch setups often. Pros settle on settings and leave them alone so movement becomes automatic.
And 0.1mm actuation is not automatically best — chasing the smallest number is the most common beginner mistake. A slightly higher setting you never think about beats an extreme one that surprises you twice a fight.
How to apply it: exact settings to use
Use this simple process. It follows the conservative starting settings used by most guides, and it protects you from the accidental-input problem.
Step 1: Turn rapid trigger on for movement first. Enable it on WASD to start with. Leave the rest of your keyboard on normal settings until your movement feels right. You can expand later if you want to, but movement is where the proven benefit is.
Step 2: Start conservative, not extreme. Set WASD actuation to around 0.7–1.0mm, and the rapid trigger reset to around 0.2–0.5mm. These are typical starting ranges, not magic numbers. They are high enough to avoid most accidental presses, and low enough to feel the faster reset straight away.
Step 3: Lower in small steps only if it stays clean. If after a few matches you have had no accidental inputs, lower the settings in 0.1mm steps. Stop the moment you notice a stray press, a movement key cutting out, or your finger resting weight causing an input. Go back one step and stay there.
Step 4: Keep the risky features off. Turn all SOCD and Snap Tap style features off, and use no macros. The safe, widely recommended approach across competitive shooters is rapid trigger on, those input-priority features off. By comparison, in Valorant, Riot’s rules are broader: hardware that gives an unfair advantage can be punished, so the same conservative approach — rapid trigger on, all SOCD/Snap Tap style features off, no macros — is the one to copy everywhere.
| Setting | WASD movement keys | Other keys | Why |
|---|---|---|---|
| Actuation point | ~0.7–1.0mm to start | Normal / default | Low enough to feel responsive, high enough to avoid resting-finger presses |
| Rapid Trigger reset | ~0.2–0.5mm to start | Off or normal to start | Faster direction changes without making keys twitchy |
| Adjustment rule | Lower by 0.1mm at a time | Change one thing at a time | Only lower if no accidental inputs appear |
| SOCD / Snap Tap style features | Off | Off | Keeps your setup in the safe, simple category |
| Macros | None | None | Rapid trigger is a key-timing feature, not automation |
Step 5: Test in a real match pattern, not a menu. Strafe quickly, stop suddenly, slide, and hold a key while resting your other fingers naturally. If anything fires by accident, raise the settings slightly. Your best setting is the lowest one that never surprises you.
FAQ
Is rapid trigger allowed in Deadlock?
Rapid trigger is a keyboard timing feature: it changes when your own key press and release register, and it does not automate inputs for you. The safe way to use it is rapid trigger on, SOCD/Snap Tap style features off, and no macros. Rules can differ between games, so check the current rules for any game or tournament you enter.
Will rapid trigger make me a pro-level player?
No. It removes a small release delay on movement keys, which helps strafing feel tighter. Aim, positioning, ability use, and decision-making still decide most fights. Treat it as a comfort and consistency upgrade once your basics are solid.
What is the best rapid trigger setting for Deadlock?
There is no single best number. Start with WASD actuation around 0.7–1.0mm and a rapid trigger reset around 0.2–0.5mm, then lower in 0.1mm steps only if no accidental inputs appear. Consistency beats the smallest number — 0.1mm actuation is not automatically best.
Conclusion
Yes, pros use rapid trigger in Deadlock — sensibly, not extremely. Put it on movement keys, start around 0.7–1.0mm actuation with a 0.2–0.5mm reset, keep SOCD-style features and macros off, then stop adjusting and play.


